Home > Error Code > Error 616

Error 616

Contents

An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments. ERROR_BAD_CURRENT_DIRECTORY 703 (0x2BF) {Invalid Current Directory} The process cannot switch to In your "Port Settings", ensure that FIFO is not set to low 3. This system will shutdown in 1 hour. Consequently the descriptions of these codes cannot be very specific.

In your "Port Settings", check that FIFO is not set to low 3. Install Blue Frog connection software again 3. If the problem persists, you might need to contact your ISP Error #680 Error Message: There is no dial tone. All rights reserved.

Vpn Error Codes

Below is a list of the most common error codes that you may face while using Windows and its basic components. If this problem arises while dialling up to the internet, verify that the settings of the event log have been correctly set 2. Else, install your modem drivers again Error #718 Error Message: PPP Timeout Solution: 1. Solution: 1.

The system has been shut down. ERROR_PNP_REBOOT_REQUIRED 638 (0x27E) Device will not start without a reboot. ERROR_INSUFFICIENT_POWER 639 (0x27F) There is not enough power to complete the requested operation. Chat Not a DIRECTV Customer Yet? ERROR_USER_PROFILE_LOAD 500 (0x1F4) User profile cannot be loaded. ERROR_ARITHMETIC_OVERFLOW 534 (0x216) Arithmetic result exceeded 32 bits. ERROR_PIPE_CONNECTED 535 (0x217) There is a process on other end of the pipe. Computer Error Codes List The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired). ERROR_MEDIA_CHECK 679 (0x2A7) {Media Changed} The media may have

Ensure that no other program is making use of the modem Error #621 Error Message: Cannot open the phone book file. Computer Error Codes Troubleshooting If you are an end-user that is experiencing difficulty with an application you are installing or running, contact customer support for the software that is displaying the error message. {{offlineMessage}} Store Store home Devices Microsoft Surface PCs & tablets Xbox Virtual reality Accessories Windows phone Software & Apps Office Windows Additional software Windows apps Windows phone apps Games & Entertainment https://msdn.microsoft.com/en-us/library/windows/desktop/ms681388(v=vs.85).aspx Try reinstalling it 5.

Too much data may have been put in the shared memory window. ERROR_NOT_TINY_STREAM 598 (0x256) The stream is not a tiny stream. ERROR_STACK_OVERFLOW_READ 599 (0x257) The request must be Computer Error Codes Beeps The volume contains detected corruptions and must be scanned. ERROR_CORRUPT_LOG_CLEARED 798 (0x31E) One of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions. ERROR_ORPHAN_NAME_EXHAUSTED Else, create the dialler again 4. Should the application use the secure module %hs? ERROR_DBG_EXCEPTION_NOT_HANDLED 688 (0x2B0) Debugger did not handle the exception. ERROR_DBG_REPLY_LATER 689 (0x2B1) Debugger will reply later. ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE 690 (0x2B2) Debugger

  1. You can copy, modify copies of this page, under the conditions stipulated by the license, as this note appears clearly.
  2. Files must be moved from the recovery directory. ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE 800 (0x320) The oplock that was associated with this handle is now associated with a different handle. ERROR_CANNOT_GRANT_REQUESTED_OPLOCK 801 (0x321)
  3. Your modem might not be working properly.
  4. The system has automatically enabled tracking code in order to try and catch the culprit. ERROR_WAKE_SYSTEM 730 (0x2DA) The system has awoken. ERROR_WAIT_1 731 (0x2DB) ERROR_WAIT_1 ERROR_WAIT_2 732
  5. Your receiver has received only part of the data it needs to decode ...

Computer Error Codes Troubleshooting

Select the modem's COM port and under the Diagnosis section, open "More Info". Solution: 1. Vpn Error Codes Try to reboot your system 2. Dial Protocol Error 6 Try to reinstall your modem drivers 3.

Please ensure that no other client on the network is configured to use 192.168.0.1 Error #800 Error Message: Unable to establish the VPN connection. Solution: 1. Else, install a new modem Error #778 Error Message: It was not possible to verify the identity of the server. The callback entrypoint should be declared as WINAPI or STDCALL. Computer Error Code 404

Ensure that the Access Number is correct 3. Local fixups must be performed on this image. ERROR_RXACT_STATE_CREATED 701 (0x2BD) This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to Please contact your system vendor for system BIOS update. ERROR_PNP_TRANSLATION_FAILED 672 (0x2A0) A translator failed to translate resources. ERROR_PNP_IRQ_TRANSLATION_FAILED 673 (0x2A1) A IRQ translator failed to translate resources. errOSACantCoerce = errAECoercionFail, /* Signaled when a value can't be coerced to the desired type. */ errOSACantAccess = errAENoSuchObject, /* Signaled when an object is not found in a container*/ errOSACantAssign

Additional storage requests will be ignored. ERROR_NO_CALLBACK_ACTIVE 614 (0x266) A callback return system service cannot be executed when no callback is active. ERROR_PWD_TOO_SHORT 615 (0x267) The password provided is Computer Error Codes And Solutions The entrypoint should be declared as WINAPI or STDCALL. Error #794 Error Message: The Framed Protocol RADIUS attribute for this user is not PPP.

This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device. ERROR_FT_WRITE_RECOVERY 705

Your modem might not be working properly. This error was returned by the server on which the file exists. The system has been shut down. ERROR_DATA_NOT_ACCEPTED 592 (0x250) {Data Not Accepted} The TDI client could not handle the data received during an indication. ERROR_VDM_HARD_ERROR 593 (0x251) NTVDM encountered Microsoft Rdp Error Code 772 Ensure that the right Access Number is being dialled 2.

Try to install your modem drivers again Error #630 Error Message: The port was disconnected due to hardware failure. Solution: 1. If you are still facing problems with them, either contact your ISP or a technician to fix the problem. Ensure that you are using the right modem drivers by checking the modem diagnostics.

In the answer string the first digit is theconnection profile id, and the second number tells the status: 0 Down - Internet connection is defined but not connected.1 Connecting - A Please try to save this file elsewhere. ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR 789 (0x315) {Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. errCoreEndianDataTooShortForFormat = -4940, errCoreEndianDataTooLongForFormat = -4941, errCoreEndianDataDoesNotMatchFormat = -4942 ScrapMgr error codes (CarbonLib 1.0 and later) internalScrapErr = -4988, duplicateScrapFlavorErr = -4989, badScrapRefErr = -4990, processStateIncorrectErr = -4991, scrapPromiseNotKeptErr = -4992, DIRECTV Error Code 775 This number is an error code that indicates your receiver is having trouble communicating with your satellite dish.

Select OK to continue, or CANCEL to fail the DLL load. ERROR_RECEIVE_PARTIAL 707 (0x2C3) {Partial Data Received} The network transport returned partial data to its client. Wait until your modem disconnects properly 2. Please schedule to take the volume offline so that it can be repaired. ERROR_DISK_REPAIR_UNSUCCESSFUL 793 (0x319) The volume repair was not successful. ERROR_CORRUPT_LOG_OVERFULL 794 (0x31A) One of the volume This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device. ERROR_IMAGE_MACHINE_TYPE_MISMATCH

To get your channels back as... The System Error Codes are very broad. Solution: 1. As a result, your TV signal may be interrupted.

svTempDisable = -32768L, /*Temporarily disable card but run primary init.*/ svDisabled = -32640, /*Reserve range -32640 to -32768 for Apple temp disables.*/ smBadRefId = -330, /*Reference Id not found in List*/ Try to reboot your computer 2. Solution: 1. AppleScript) any or allĀ of these may also occur at runtime.