Non-contain Design Jet 500 Error Messages HP Design Jet 500/510 Plotter Error Codes HP DJ 500 system error 01:10 A problem with the Electronics module has occurred. If so, reinstall the duplexer. It might be necessary to replace the specified DIMM. No color on the print job.HP COLOR LASER PRINTER 4600, 5500 ERROR 51.XK, 51.XC, 51.XM, 51.XY1.
Turning the printer off and then on can clear some of these messages. The two front mounting screws have grounding clips that are not captive when the screws are removed. NOTE: Avoid spilling loose toner. CHOSEN PERSONALITY NOT AVAILABLE To continue press Product illustration alternates with CHOSEN PERSONALITY NOT AVAILABLE For help press Product illustration The printer received a request for a personality (printer language) that http://printerrepairsupport.com/51-20-error-hp-4240-4250-4350-printer/
top 58.X PRINTER ERROR alternates with 58.X PRINTER ERROR To continue turn off then on Description A printer error has occurred where a memory tag central processing unit (CPU) error was MP Tray 1 Constantly Lifting - HP P3015 Laserjet Printer-Solenoid Fix Thumping / Gear Noise - HP Laserjet 5si, 8000, 8100, 8150 PrinterParts and Supplies StoreBrother Parts / Supplies Canon Parts If the paper is stuck in a tray, try removing it through the tray above (if applicable) or through the top-cover area. If the message persists, contact an HP-authorized service or support provider. 62 NO SYSTEM To continue turn off then on This message indicates that no system was found.
Use HP Web Jetadmin to initialize the file system. Forum HP Pavilion dv7-6b51ea Dead Fan > Error - System Fan <90B> Forum More resources Ask the community Tags Example: Notebook, Android, SSD hard drive Publish a b D Top Experts If the message persists, contact an HP-authorized service or support provider . 66.XY.ZZ EXTERNAL DEVICE FAILURE For help press Product illustration An error occurred between the printer and an external paper-handling Press Product illustration (Select button) to use a type and size that are available in another tray.
NOTE: If the top cover does not close, make sure the print cartridge is correctly installed. EIO X DISK FILE SYSTEM IS FULL To clear press Product illustration alternates with
Pressing the Select (check) button should clear the message. DATA RECEIVED To print last page press alternates with
Press Product illustration (Select button) to accept the values in the message, or use Product illustration (Up button) and Product illustration (Down button) to scroll through the available choices. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl12422 If a message persists after performing all of the recommended actions, contact an HP-authorized service or support provider. ( http://www.hp.com/support/lj4250 or http://www.hp.com/support/lj4350 .) Interpreting control-panel messages Interpreting control-panel messages Control panel Defective laser scanner assembly. 4. Once you reach 200,000 pages on HP LaserJet 4000/4050 and 4200 printers the error message appears and you need to reset the maintenance count to zero to make the message go
If the message persists, turn the printer power off and then on again. After clearing all jams, send the print job again because the printer power has been turned off. top 13.XX.YY.DUPLEX JOB INTERRUPTED Description There was an error while the printer was duplexing. Press Product illustration (Select button) to use a type and size that are available in another tray.
Powered by Blogger. NON HP SUPPLY INSTALLED Economode disabled The printer has detected that the print cartridge is not a genuine HP supply. Try removing and reinstalling the optional envelope feeder. Turn the printer off and then on. 3.
HP LaserJet 4000n and 4050 printer failures with service error codes! Load the tray with the size configured for the tray. If tape has been removed, replace the toner cartridge.
If necessary, lift the black plastic guide that is located on the top of the fuser to gain access to the jammed paper. Figure 39: Removing the jammed paper Push the fuser firmly into the printer until the blue levers on both sides click into place. Check the configuration of the EIO (HP Jetdirect card) and the host computer. alternates with 51.XY PRINTER ERROR To continue turn off then on 52.XY PRINTER ERROR For help press?
HP DesignJet plotter repair in Southern California! Figure 14: Lifting the paper-access plate Slowly pull the jammed paper out of the printer. System error 86:01 Carriage-Axis shutdown. This error can occur if the driver you are using is not IEEE-1284 compliant.
Lift the optional duplexer up and then pull it out to remove it. HP 500 System error 01:12 The EEROM is not configured correctly. Printers problem solving,tips, tricks and tutorial. Print a Configuration page and verify that the tray settings match the media in the tray.
top 68.X PERMANENT STORAGE ERROR For help press ? We stock ample parts to repair HP Laser-Jet printer with 10:10 memory error, 41.3 paper size error, 49, 494C06 firmware error, 50.1, 502, 50.3, 50.4, 50.5 fuser error, 51.1, 51.2 beam top 10.XX.YY SUPPLIES MEMORY ERROR Description The printer is unable to read the electronic information (e-label) on the print cartridge so that the printer can keep track of the page count HP LASER PRINTERS 3SI, 4SI 1.
If the error reappears, record the message, and contact HP Customer Support. 66.XY.ZZ INPUT DEVICE FAILURE An error occurred in an external paper-handling accessory. We repair Large Format HP Design-Jet Plotters! Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers You will be prompted for an email address, the URL for the hotfix together with a password will be emailed to that address.
These settings set the amount of time that a clearable warning is shown on the printer control panel display. If you have found the information useful and possibly saved you a service call, a donation would go a long way in keeping the articles coming and help my family understand Use (Up Arrow) or (Down Arrow) to scroll to PRINT CONFIGURATION, and then press (Select). Remove all the memory DIMMs or third-party DIMMs from the printer.
Most the time when this error happens the machine starts up and goes to a ready state.